MPPT solar charge controller Victron Energy SmartSolar 100/15

Victron Energy products come with a 5-year manufacturer's warranty.

The SmartSolar charge controller processes energy from solar panels and stores it in batteries, maximizing solar gains, intelligently maintaining battery status, and extending battery life. The SmartSolar charge controller can also recharge a severely discharged battery, as it can operate with battery voltages as low as 0 volts, provided the cells are not permanently sulfated or otherwise damaged.

Main features:

Ultra-fast MPPT technology:
The controller continuously monitors the voltage and current from solar panels and, thanks to MPPT technology, extracts maximum energy from them, which is particularly beneficial in varying sunlight intensity. MPPT technology provides up to 30% higher energy yield compared to PWM solar controllers and up to 10% higher yield compared to slower MPPT controllers.

Remote monitoring and control:
If your installation is connected to the internet via a GX device, the VRM portal provides access to your devices anytime, anywhere.

Load output:
The intelligent Load output function prevents batteries from discharging below critical levels. You can configure the voltage at which SmartSolar disconnects the load, preventing excessive battery discharge. The BatteryLife function keeps the battery in good condition and extends its lifespan.

Built-in Bluetooth:
Thanks to the built-in Bluetooth, you can pair the SmartSolar charge controller with your smartphone or other device via the VictronConnect app to set up, monitor, or update the system.

VE.Direct connector:
VE.Direct is used to connect to a GX device, PC, or other devices.

Other features:

• natural passive cooling
• automatic battery voltage recognition
• overheating protection and power reduction at high temperatures
• flexible charging algorithm
• day/night timing and dimming option
• internal temperature sensor compensates for absorption and float charging voltage temperature
• optional external battery voltage and temperature sensing via Bluetooth
• Smart Battery Sense or BMV-712 Smart Battery Monitor can be used to read battery voltage and temperature of one or more SmartSolar controllers
• fully discharged battery recovery function
• starts charging even when the battery is completely discharged
• reconnects to a fully discharged Li-ion battery with integrated disconnect function

Technical parameters:

• battery voltage (auto-select): 12/24 V
• charging current: 15 A
• PV max: 12V/220W, 24V/440W
• maximum PV open-circuit voltage: 100 V
• maximum efficiency: 98%
• operating temperature: -30 to +60 °C
• terminals: 6 mm2 / AWG10
• protection class: IP43 (electronic components), IP22 (connectors)
• dimensions: 100 x 113 x 50 mm
• weight: 0.6 kg

Warning:
Victron Energy MPPT controllers are not permitted for use in combination with PV panel optimizers. Use may result in damage to both MPPT controllers and optimizers, and such damage may not be recognized as a valid warranty claim.

Further information and technical data can be found in the manual and datasheet in the "Downloads" section.